![]() ![]() One other advantage to have the ADB is the capability to send files via USB using ADB push, but unfortunately you wont be able to do this because the ADB is not enabled. The module will detect the ESC button interruption and start the bootloader mode.ĭon't forget to swap the USB cabble from USB-to-Serial port to USB-to-USB port.ġ3. If you have any issue to access the OpenLinux terminal (if you are stuck in a bootloop for example) you can open the serial interface (ttyUSB1) before power on the module, and so power on while pressing the ESC button. Now swap the USB cable from USB-To-Serial port to USB-to-USB port and you will able to use fastboot normally as the same after send adb shell sys_reboot bootloader Plug the adapter in your PC, run lsusb in terminal and check the identified driver name: lsusb What really matters is the internal ethernet chipset in your adapter, so you need to check it to get the right driver. The brand name and model doesn't guarantee that this is the same driver name for the device. ![]() You need to identify the correct USB driver for your USB to ETH adapter. But you can use any other converter just swapping the driver configuration in a few steps forward. *I'm using an HP DHC-CT101 Adapter because reliability and ease to be found at any webstore or physical store (brazilian market for my case).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |